VMR System Requirements

This topic applies to Windows XP Home Edition and Windows XP Professional only.

The VMR uses the graphics processing capabilities of the computer's display card exclusively; the VMR does not perform any blending or rendering of video using the host processor as doing so would greatly impact the frame rate and quality of the video being displayed. When taking advantage of the new features offered by the VMR, particularly blending of multiple video streams and/or application images, the overall performance obtained is very much dependent on the capabilities of the graphics card being used on the computer. Graphics cards that perform well with the VMR have the following hardware support built into them:

• Support for YUV and "non-power of 2" Direct3D texture surfaces.
• The ability to StretchBlt from YUV to RGB DirectDraw surfaces.
• At least 16MB of video memory if multiple video streams are to be blended together. The actual amount of memory required is dependent on the image size of the video streams and resolution of the display mode being used.
• Support for an RGB overlay or the ability to blend to a YUV overlay surface.
• Hardware accelerated video (support for DirectX Video Acceleration) decoding.
• High pixel fill rates.

Note   The VMR requires that the system monitor be set for a color depth of at least 16 bits. The VMR cannot be put into a run state if the monitor is set for 256 colors.